Deep Well Hand, Pump, Well Pump For Emergency Use For Your Family
When The Lights Go Out.
In The Lower 48 States
Our Exclusive Design
Our Pump Piston Weighs Only 1 lb 13oz
Hand Well Pumps
Easily Next To Your Existing Electric Pump...
Most EconomicalEmergency Hand Well
Pumps On The Market...
eBay And Over
Our "High Pressure" Pump Piston ,
For A 100'
Detachable Security Pump Handle
Supply The PVC Pipe From Home Depot
NOTE: If You Need More
FREE Fittings To Go Deeper Than
100', (Up To 175') Simply Send Us An email Along With Your
Order. We'll Ship Everything FAST & FREE.
FAST & FREE SHIPPING
By 3 Day Priority Mail Right To Your Door
A Hand Well Pumps To Meet Your Needs..
25', 50', 100', 150'
A Tough &
Reliable Emergency Deep or Shallow Hand Well Pumps
A Few Of Our
Happy Campers - Read Their Comments On
Testimonial Page Below
Shallow Or Deep Wells
Compare With Our Original
Hand Well Pumps Piston...Much Smaller & Lighter
Compare Our New Outer Casing Pipe...Much Smaller & Lighter
Can Be Purchased At Home Depot Or Lowes For Pennies A Foot.
SAVE A BUNDLE OF
Of Casing Pipe Weighs
Only 15 lbs...
Of 1/2" Pumping Pipe Weighs
Only 17.5 lbs
Fittings Weigh About
For A Total Of About
Including Pump Piston
Our original Hand Well Pumps System used Heavy Schedule 40 PVC For The Outer Casing, (A 100'
Pump With 1 1/4" And 1/2" Piping Weighs Almost 80 lbs, Compared To Our New Ultra Slim Hand Pump System
Weighing Only 35 lbs)...
light as a feather.
#1. The Smaller 1" Outer Casing Pip
Fits Easily Into 99% Of Wells Along Side Your Existing Electric
The Chance OfGetting Hung Up
Your Existing Pump Pipe Or Wiring During Installation.
It's Much Easier To Install
Of Piping And It's
Easily Removable If you Relocate.
#3 Your Pipe Will Cost You Less Than Half
At Home Depot Or Lowes Than The Heavy
100' Hand Pump
50' Hand Pump
5' Hand Pump
was a struggle for some folks to install our original Deep Hand Well
System due to the weight of all the heavy Schedule 40 pipe,
especially at 50' or deeper...at times requiring 3 to 4 people
to handle the piping and Install It properly...BUT
NOT ANY LONGER...Now you don't need the whole
neighborhood to help you install your new Hand Well Pumps...
In Most Cases, One Person Can Install
The Hand Pump
HURRICANES, ICE STORMS & Other
SEVERE WEATHER POWER OUTAGES.
CLEAN & SAFE Drinking Water When The Lights Go
Would Be A Good Time To Get Started.
We're The First
For Security & Discreet Concealment From Prying Eyes.
Security Pump Handle Is Included
Of A Kind"
Custom Made Check Valve
High Pressure And Easier Pumping...
Read All About Our Custom Check
Our PVC Pipe:
We Do Not
"Off The Shelf" PVC In Our
Hand Pump Piston. We Use "Hospital Grade"
PVC, Which Is Manufactured To Our Specifications With Special
Resins For Long Term Durability.
Pump Cost Estimates
- A Must
Read Before You Purchase Any Hand Pump
Hand Well Pumps for Deep
Water, Hand DIY Pump For Emergency Use.
Hand Pump and hand pump
for deep wells,
shallow hand pump, pump, diy , hand,
manual deep Hand Well Pumps, hand pump,
deep, Hand Well
Pumps for emergency use.
hand Pump, Manual
pump and DIY
Well pump Hand Pump for
Have Installed Over 350
Complete Hand Pump Systems "Locally" In Our Area Since 2006 And
Sold Over 1,000 Pump Pistons
On Our Website And eBay In The Last 12 Months.
We're Here For You During Your
VIDEO - SEE
MY PUMP IN ACTION
You Can Build A Hand Pump Just
From 180' Deep,
In Your Well Pipe Is 150' Or Less, My Hand Well Pumps System Is The Perfect Solution.
Your Actual Total Well Depth Is
You've Been Shopping For
A Hand Well Pumps For An
Emergency Water Supply, You've Seen The Prices...
Yes, They Are High!
Don't Have To Pay $800 To $1,200 For Emergency
I'll show you
"STEP BY STEP" how to BUILD
YOUR OWN HIGH PRESSURE Hand
Well Pumps and you'll
show you with close up photos
and detailed description
of what to do from start
to finish. It's Very Easy To Assemble And
Available By Phone The Day You Install Your
Hand Well Pumps. Just In Case You Have Questions.
Here Are The Only Tools You'll Need
Also Need A DEEPHand Well Pumps Cylinder
It's Simple: We Supply You
The MOST IMPORTANT Part Of Any Pump.
Our State Of The
Hand Well Pumps Cylinder, Our
And The Detachable Security
Pump Handle For Only $179
Spend Between $25 to $50 For PVC Pipe At Home Depot And
You Can Build A Tough Reliable Hand Well Pumps
I Simply Want You To Get A Tough And Reliable Emergency
Hand Well Pumps For Your Family As Cheap as possible.
example of what an average Hand Well Pumps would cost
using my system:
Say you have a
wellwith a static water level in your well pipe between
50' to 75'
(the most common depths in the U.S.). You'll need
our 100' kit to be on the safe side.
The cost of our 100' kit is $179. You'll need
the foot valve to be at least 15' to 20' below your static
water level. So with that in mind, let's figure using
the full 100'. You'll need a total of
100' of PVC piping at a cost of about .32 cents a foot
at Home Depot, that's about $32.00.
total cost of your "ready to use"HandWell Pumps is $179+$32=$211
complete hand pump in your
Bucks For A
Emergency Hand Well Pumps...Simply
Cannot Be Beat
Take the above cost
example, where the total cost of a 100' hand pump using
my system is only about $200 versus 100' Complete
Hand Pump Kits that are on the market for $700.
Why the big difference in price? Well, here is the
You are paying
Top Dollar for PVC pipe
you are paying the shipping cost
which is included in the total price.
really no need to pay for shipping heavy PVC pipe,
when you can pick up our much lighter pipe yourself at Home Depot
for half the price...plus,
there is no need to pay Top Dollar for PVC pipe
when you can purchase it at Home Depot for just
pennies per foot.
For A Hand Pump.
to 60' Pump Kit...$425
to $900 compared
100' Pump Kit...$600
150' Pump Kit...over $1,100
Compared To Our System
guarantee you will be most pleased
new E-Z Water
Hand Well Pumps System.
You Want An
Emergency Hand Pump In Your
I know from
a very personal experience
that one should never depend on city water or the
electric company. In 2005 after Hurricane Rita hit the
Texas Gulf coast, we were without electricity for 6 full
weeks and a sporadic drinking water supply. Believe me,
it is not fun standing in a long line in the sweltering
heat of summer trying to get a few bottles of clean
drinking water for your family. I vowed then and there
to make sure my family was never in that
dangerous and possibly life threatening situation again,
so I did something about it.
Our Ordeal With Hurricane Rita
and after my 350'
deepwell was ready.
I started looking for a Hand Well Pumps to buy. I
couldn't find one for under $800 to $1,200. There had to
be a better way. So I went to work and after 3 months of
testing various piston designs, I came up with the best
combination for a deep Hand Well Pumps piston. I don't
know about you, but I wanted a fairly high volume flow
with no maintenance and absolutely no worry about
reliability. Plus I wasn't about to pull the whole pump
out of my well
after 5 or so years, just to change leather piston cups.
IT'S SIMPLE, I needed a pump to pump water, EVERY TIME I
need it to pump water, even 20 years from now.
is my E-Z Water
Hand Well Pumps
that I built after
Hurricane Rita in 2006 and it's still going strong after
all this time. Notice the high flow. It really pumps up
the water due to my improved pump piston...Expect around
4 to 5 GPM (it'll do more, but that's all I advertise)
depending on your pumping speed and your
recovery rate. Personally, I just take my time. Why
This is my E-Z
Hand Well Pumps
Addition To Hurricanes
and other natural earth disasters
that could cut off our electricity and water supply, I'm
also concerned about the Solar Storms NASA scientists
are predicting for 2013 with massive blackouts possible across the
nation. I'm not one to listen to all the Apocalypse
predictions, but when NASA scientists are
predicting Major Solar Storms may be coming soon...I
and prepare. Read more
about it at their website.
John Tatman, E-Z
Hand Pump Piston Is Totally MAINTENANCE FREE - NO
Leather Piston Cups To Wear Out Or Rot And
100% FREEZE PROOF
Piston has a
profile of 1 5/8" At the connecting
couplers and it uses only 1" pipe that goes into your
well, with a 1/2" Pumping Handle.
Pump Cylinderis approximately 4' long and
can fit easily into a 2"
casing, or into most 4" or 6"
casing along with your
existing submersible pump. The E-Z
Pump System will pump around 4 to 5 gallons per minute, at a
moderate pumping rate. This will depend on your pumping
speed and your
The Piston Is The Most IMPORTANT Part Of Any Hand Pump.
Ours has state of
the art design with no leather piston cups to wear
out or rot in just a few years. Our Pump Piston
gives you a lifetime of reliable and maintenance free
service. Drop it in your
well and forget about it until you need it...even
20 years from now.
Read All About Our Custom
The Check Valve Sits Inside The Piston
Outer Casing And Is The Most
Part Of The Piston. It Controls
Ease Of Pumping & Water
The ShelfCheck Valves
That Other Companies Use in
Our Pump Piston
intake hole from an "Off The Shelf" Check Valve is much too small to allow
sufficient water flow. Yes they work, but they are much
harder to pump and you get
less water per stroke.
Check Valve Is Custom
Made In Our Shop...
Off The Shelf
To The Pump Handle Outlet, Which Means
Per Stroke. Plus It's
Totally Maintenance Free!
Brasswith a solid brass
poppet and heavy duty neoprene 'O' ring as the seal and
a stainless steel strainer.
It will last forever!
What If I Don't Want To Install Right Away?
In fact, more than 50% of our customers don't
install their pump right away. They get all
the necessary piping, fittings and PVC cement
along with our detailed instructions and simply
store everything for an emergency.
guide you from start to finish
in the assembly
and installation of your new E-Z pump